General Bar Code and OCR Properties dialog box

Use this box to set parameters for defining bar codes, OCR and mark detection text segments from images.

Extract bar codes/OCRs from image between - enable this checkbox to activate this option. For more information, click hereThe values entered in these fields limit the images from which bar codes or OCR text will be read to only those whose size falls in between these values.

This is useful when using bar code header sheets for document separation and indexing that are significantly smaller than the rest of the pages of the document. This option can increase the performance of scanning into the bar code/OCR application. When this option is enabled, the minimum default value is 1000 bytes and the maximum default value is 100,000 bytes..

Minimum number of bytes - the default number is 1000 bytes.

Maximum number of bytes - the default number is 100000 bytes.

OK - click to close dialog box. Your parameters for defining bar code, OCR or mark detection zones are now saved.