Remove Blank Images Setup dialog box

Use this box to set up the automatic removal of blank images from your batch.

Start at document - enter the document number in the batch where you want verification to begin. The default is the currently active document.

Show Black and White images below and Show Color/Grayscale images below - define the byte-size threshold of the images to be verified. A good setting for typical business documents is 5000 bytes in 200 dpi black and white.

Check only back sides - click to remove only the blank back sides of the images in a batch.

Preselect all - all images are pre-selected for deletion. For more information, click hereAfter the batch is processed, the software displays all the back images below the specified number of bytes (for example, 5000 bytes). These images are displayed in a red highlight color, unless you disabled the Pre-select all option. All colored images are considered blank and ready to be deleted..

Display layout - define the number of columns and rows you want to display. On a 1024 x 768 SVGA screen, a matrix of 14 x 7 allows you to check 98 images per screen for images containing valid data.

OK - closes the dialog box. The setup for removing blank pages from your batch is now saved.

See also:

Removing blank images from a batch

Remove Blank Images window