Bar Code, OCR and Mark Detection Values dialog box

Use this box to view information about a bar code zoneA bar code image that the software recognizes as a separator between batches or documents in images being scanned. Before a bar code image can be used as a separator, the user must define it as a bar code zone in the Capture tab of the Job Setup dialog box. or an OCR(Optical Character Recognition) - the process of recognizing printed characters by a software application. zone.

Label - indicates the name assigned to the bar code, OCR or mark detection zone on the Bar Code (OCR/Mark Detection) Zone dialog box.

Type - indicates the type of bar code found in the zone. If the zone is an OCR zone, the Type will be OCR. If the zone is a mark detection zone, the Type will be Mark Detection To view a list of bar code types supported by the software, click here. If the zone is an OCR zone, the Type will be OCR.

Confidence level (in a percentage) of the bar code/OCR/mark detection value found.

Orientation of the bar code, OCR or mark detection zone (with 0 degrees representing a horizontal and right-side-up bar code, OCR or mark detection).

0° represents a horizontal, right-side-up bar code, OCR or mark detection zone
90° represents a vertical, top to the left bar code, OCR or mark detection zone
180° represents a horizontal, upside-down bar code, OCR or mark detection zone
270° represents a vertical, top to the right bar code, OCR or mark detection zone

Value of the bar code, OCR or mark detection zone.

X and Y coordinates of the upper left corner of the bar code, OCR or mark detection zone. The coordinates are in 1/100ths of an inch and represent the distance of the zone from the upper left corner of the image.

Width and Height of the bar code, OCR or mark detection zone in units of 1/100 of an inch.

If a bar code, OCR or mark detection value cannot be found for a zone, the zone is still included in the value list with only the label and zone coordinates displayed.

OK - closes the dialog box.