Kodak i1800 Series Scanners
The Kodak i1800 Series Scanners window provides you access to your Scanner Properties dialog box as well as settings for image addressing. For more information on your scanner, consult your scanner User's Guide. For general information on image addressing, click here.
Scanner icon - when you click this icon, the TWAIN Datasource will be displayed allowing you to configure your Imprinter, Image Address, Batch and Patch options. For information and procedures on using the TWAIN Datasource, refer to the on-line help for the TWAIN Datasource.
New batch starts with counter equal to - enter the number you want to start a new batch with.
Message Configuration — displays the Message Configuration dialog box. This dialog box allows you to specify custom text to be included in your print string. A maximum of 20 characters is allowed. You can have up to six unique messages per string. The Printer option in the TWAIN Datasource must be enabled and configured before configuring custom messages in the software.
The printer configuration that you set up in the software will override any printer configuration setup in the TWAIN Datasource.
-
Click Message Configuration. The Message Configuration dialog box will be displayed.
-
Click Setup for each message you want to configure. The Message Setup dialog box will be displayed.
-
Select a value from the Predefined values list and click Add Item.
-
Click OK when finished.
Click Delete Item to remove the last value in the formula, or Delete Formula to delete the entire formula
Under Image Addressing,you can enable the following options:
-
Delete level 3 pages: this counter is associated with the numeric portion of the batch name. Whenever a Level 3 page is scanned, the software will automatically create a new batch and discard the Level 3 page.
-
Delete level 2 pages: this counter is associated with the document number of the current batch. Whenever a Level 2 page is scanned, the software will automatically create a new document.
-
Set image address on new batch: sets the image address value when a new batch is manually created in the software. This option does not affect the image address when batches are automatically created in the software (e.g., blank page separation, bar code separation). By default, the image address default value for a new batch will be as follows:
-
Fixed field: the default value as defined in this dialog box.
-
Level 3: the batch number portion of the batch name (e.g., a value of 19 if the batch name is Batch019).
-
Level 2: document number for the first document in the batch.
-
Level 1: 0 if the image address format is Level 2 or Level 3. 1 if the image address format is Level 1.
-
Set image address on scanner start: automatically resynchronizes the scanner image address with the current scan batch every time the scanner is started. The image address value is set to what the image address should be for the next scanned page. This option is only available when Set image address on new batch is enabled.
When the scanner image address is resynchronized, the image address fields will be set to the following:
-
Fixed field: will not change from the current scanner value.
-
Level 3: the batch number portion of the batch name.
-
Level 2: the current document number.
-
Level 1: the number of pages in the current document if the image address format is Level 2 or Level 3. Number of pages in the current document + 1 if the image address format is Level 1.
When simultaneous scanning, Set image address at scanner start is not recommended. This is because the number of pages in the current document is not correctly maintained by the software when simultaneous scanning. As a result, the Level 1 portion of the image address can easily get out of sync.
Fixed field value - this is a static field containing ASCII text that does not increment or change during scanning.Enter the text in the field or click Setup,which displays theFixed Field Value Configuration dialog box.
OK - saves your settings and closes the Job Setup dialog box.