Kodak i200 Series Scanners

The Kodak i200 Series Scanners window provides access to your Imprinter tab and the check box for enabling the batch counter  For more information on your scanner, consult your scanner User's Guide.  For general information on image addressing, click here.

Imprinter tab

Counter - this is the document count for the scan session. This value is incremented sequentially by the scanner and returned in the image header.

Counter length - allows you to configure the length of the counter from 1 - 9. However, if for example, you only have six characters left in the print string, then the length would be limited to 6.

Counter format - allows you to configure the format of the counter when the width of the value is less than the field width (the examples indicate a field length of 3 and the counter at 4).  Select one of the following formats from the drop-down list:

• Display leading zeros  

• Suppress leading zeros

• Compress leading zeros

Date Delimiter- select a separator setting from the drop-down list:None, Forward slash(2006/08/24),Hyphen (2006-08-24),Period(2006.08.24), orSpace(2006 08 24).

Font - use the drop-down list to select Large comic, Large cine, Small comic, or Small cine.

Position - enter the desired position.

Message - displays any specify custom text to be included in your print string. A maximum of 20 characters is allowed. You can have up to six unique messages per string.  Click Setup to open the Message Setup dialog box.

Print string -  enter a print string or click Setup to open the Formula Configuration dialog box and set up your print string using predefined values.

New batch starts with counter equal to - enable the checkbox for this feature, then enter a starting number in the text field.

OK - closes the dialog box and saves your settings.