Deleting a bar code zone

To delete an existing bar code zoneA bar code image that the software recognizes as a separator between batches or documents in images being scanned. Before a bar code image can be used as a separator, the user must define it as a bar code zone in the Capture tab of the Job Setup dialog box.:

1. Select File>Job Setup. The Job Setup dialog box will be displayed.

2. Select a job setup from the Job Name drop-down list.

3. Open the Capture tab and select Separation>By Bar CodeZones setting. The Bar Code window will be displayed.

4. Click on the bar code zone that you want to delete. You can also click on the bar code zone name in the list on the left side of the Bar Code window. The zone is highlighted.

5. Click the Delete icon or right-click on the bar code zone and select Cut or Delete Zone.

6. Click OK to save your setting and close the Job Setup dialog box. The bar code zone is now deleted from the job setup.

See also:

About bar code zones

Drawing and selecting bar code zones