Kodak i800 Series Scanners

The Kodak i800 Series Scanners window provides you access to certain scanner settings. For more information on your scanner, consult your scanner User's Guide.  For general information on image addressing, click here.

The top part of this window contains four tabs.  For information on each tab, click the blue links:

• Imprinter tab (i800 scanner)

• Image Address tab (i800 scanner)

• Batch tab (i800 scanner)

• Patch tab (i800 scanner)

The bottom part of this window contains the Image Address options.  Except for the Image Address tab, these options appear in all the tabs.

Delete level 3 pages: this counter is associated with the numeric portion of the batch name. Whenever a Level 3 page is scanned, the software will automatically create a new batch and discard the Level 3 page.

Delete level 2 pages: this counter is associated with the document number of the current batch. Whenever a Level 2 page is scanned, the software will automatically create a new document.

Set image address on new batch: sets the image address value when a new batch is manually created in the software.This option does not affect the image address when batches are automatically created in the software (e.g., blank page separation, bar code separation).  for more information, click hereBy default, the image address default value for a new batch will be as follows:

Fixed field - the default value as defined in this dialog box.

Level 3 - the batch number portion of the software batch name (e.g., a value of 19 if the batch name is Batch019).

Level 2 - the document number for the first document in the batch.

Level 1 - 0 if the image address format is Level 2 or Level 3. 1 if the image address format is Level 1. .  

Set image address on scanner start: automatically resynchronizes the scanner image address with the current scan batch in the software every time the scanner is started. The image address value is set to what the image address should be for the next scanned page. This option is only available when Set image address on new batch is enabled.For more information, click hereWhen the scanner image address is resynchronized, the image address fields will be set to the following:

Fixed field - will not change from the current scanner value.

Level 3 - the batch number portion of the software batch name.

Level 2 - the current document number.

Level 1 - the number of pages in the current document if the image address format is Level 2 or Level 3. Number of pages in the current document + 1 if the image address format is Level 1..

When simultaneous scanning, Set image address at scanner start is not recommended. This is because the number of pages in the current document is not correctly maintained by the software when simultaneous scanning. As a result, the Level 1 portion of the image address can easily get out of sync.

New batch starts with counter equal to - enter a starting number.

Fixed field value - this is a static field containing ASCII text that does not increment or change during scanning.Enter the text in the field or click Setup,which displays theFixed Field Value Configuration dialog box.

OK - saves your settings and closes the dialog box.