General settings

The General settings section of the Capture tab on the Job Setup dialog box allows you to define the way images will be stored after scanning.

Scanned image location - allows you to select the current location for your output images. If you do not want images scanned from the displayed location, use Browse to select another location.

Output image location - allows you to select the final destination for your output images.If you do not want the images to reside in the displayed location, use Browse to select another location.

Description - allows you to enter any important notes on this job setup.

Page setup — sets the selected default page setup when a new batch is opened. The list of page setups available to the user during scanning may also be selected. Select Setup to display the Select Page Setup dialog box. Use the Add Item and Remove Item buttons to build a list of Selected Page Setups from the Available Page Setups list. When finished, click OK.

From the Page setup drop-down list, select the default page setup that will be used when a new batch is opened.

Automatically close batch after scanning is finished - closes the batch on the Batch Explorer and Image Viewer when scanning is complete.
Automatically output when batch is closed- processes batch to output immediately after the batch is closed.
Keep batch after output* - saves the batch in the software after it is outputted.

OK - closes the dialog box. All your settings are saved.

*This option is not available with Capture Pro Limited Edition.

To return to the Job Setup dialog box, click here.