Testing all OCR zones
This option is not available with Capture Pro Limited Edition.
When you define a new OCR zone from an image, the software automatically checks your zone to verify that it is readable. However, if you edit the OCR zone or change its properties later, it may no longer be readable. You can manually test your OCR zones to verify that they can still be read by the software.
To test all the OCR zones in a job setup:
-
Select File>Job Setup. The Job Setup dialog box will be displayed.
-
Select a job setup from the Job Name drop-down list and open the Capture tab.
-
Select Separation>By OCR Zones setting. The OCR window will be displayed.
-
Click the Test All Bar Code and OCR Zones icon. The Bar Code and OCR Values dialog box will be displayed.
-
After viewing the values in this box, click OK to return to the OCR window.
-
Click OK to save your setting and exit the Job Setup dialog box. All your OCR zones have now been tested. If you make any changes to the OCR zone settings, test them again.
See also: