Testing an individual bar code zone

When you define a new bar code zoneA bar code image that the software recognizes as a separator between batches or documents in images being scanned. Before a bar code image can be used as a separator, the user must define it as a bar code zone in the Capture tab of the Job Setup dialog box. from an image, the software automatically checks your zone to verify that it is readable. However, if you edit the bar code zone or change its properties later, it may no longer be readable. You can manually test your bar code zones to verify that the software can still read them.

To test an individual bar code zone:

Select File>Job Setup. The Job Setup dialog box will be displayed.
Select a job from the Job Name drop-down list.
Open the Capture tab and select Separation>By Bar Code Zones settings. The Bar Code window will be displayed.
Click on the bar code zone that you want to test or click on the bar code zone name in the list on the left side of the Bar Code window.
Click the Test Selected Bar Code or OCR Zone icon. The Bar Code and OCR Values dialog box will be displayed.
After viewing the values in this box, click OK to return to the Bar Code window.
Click OK to save your setting and exit the Job Setup dialog box. Your bar code zone has now been tested. If you make any changes to the bar code settings, test it again.