Testing all bar code zones

When you define a new bar code zoneA bar code image that the software recognizes as a separator between batches or documents in images being scanned. Before a bar code image can be used as a separator, the user must define it as a bar code zone in the Capture tab of the Job Setup dialog box. from an image, the software automatically checks your zone to verify that it is readable. However, if you edit the bar code zone or change its properties later, it may no longer be readable. You can manually test your bar code zones to verify that they can still read by the software.

To test all the bar codes zones in a job setup:

Select File>Job Setup. The Job Setup dialog box will be displayed.
Select a job setup from the Job Name drop-down list.
Open the Capture tab and select Separation>By Bar Code Zones settings. The Bar Code window will be displayed.
Click the Test All Bar Code and OCR Zones icon. The Bar Code, OCR and Mark Detection Values dialog box will be displayed.
After viewing the values in this box, click OK to return to the Bar Code window.
Click OK to save your settings and exit the Job Setup dialog box. All your bar code zones have now been tested. If you make any changes to the bar code settings, test them again.