Setting the range for bar code image size
Sometimes a bar code image is too small to be a readable image. You can set a range of image size to exclude images that are too small.
To set an image range for bar code images:
-
Select File>Job Setup. The Job Setup dialog box will be displayed.
-
Select a job setup from the Job Name drop-down list.
-
Open the Capture tab and select Separation>By Bar Codes settings. The Bar Code window will be displayed.
-
Select any image and right-click on a bar code zone. The General Bar Code and OCR Zone Properties dialog box will be displayed.
If a bar code zone does not exist, this option will not be available until a bar code zone is defined.
-
Set a range for minimum and maximum image size.
-
After you make your settings, click OK to close the dialog box and return to the Bar Code window.
-
Click OK to save your settings and close the Job Setup dialog box. The new image range is now saved.
After editing a bar code zone
A bar code image that the software recognizes as a separator between batches or documents in images being scanned. Before a bar code image can be used as a separator, the user must define it as a bar code zone in the Capture tab of the Job Setup dialog box., test the bar code zone
to verify that it is still readable. For information on testing bar codes,
click here.
When scanning both color/grayscale and black and white images, specify the range of the black and white image.
See also: